Cookie Img
Contact UsCompany ProfileHome
Home » Products » Pneumatic Drills

Pneumatic Drills

Straight Drill
close
Straight Drill
KBE2701450N
10mm Jacobs Chuck, stall- resistant, safety lever throttle, high performance, planetary gearing, ¼ NPT air inlet thread for 10mm air hose, 90PSI (6.3 bar) air pressure, 4CFM* ( 144 ltr / min ) air consumption, 3/8” – 24 spindle thread. Overall Length: 190mm.
Angle Drill
close
Angle Drill
KBE2701425M
10mm Jacobs chuck, fingertip control of reverse, reverse exhaust, overall head height 94mm, ¼â€ NPT air inlet thread for 10mm air hose, 90PSI (6.3 bar ) air pressure, 4CFM* ( 144 ltr /min ) air consumption, 3/8” -24 spindle thread. Overall Length : 178mm.
Impact Drill Screwdriver
close
Impact Drill Screwdriver
KBE2702152K
Suitable for drilling and screwdriving. Rubber handle provides grip and operator comfort. 10mm keyless chuck. Stall resistant. Short gear case design. Heavy duty gearing system with oil – less bushing. Spring loaded rotor vanes. Rear exhaust. Ball bearing construction for a long tool life. Free speed: 1,800rpm. Chuck size: 3/8” (10mm). Air inlet thread: ¼â€ NPT. Minimum air hose size(ID): 3/8” (10mm ). Air pressure: 90 PSI /6.2Bar. Air consumption: 3.35CFM. Sound pressure level: 100 dba. Vibration level: 0.7 m/s2 . Over length : 188
Impact Drill 178 mm
close
Impact Drill 178 mm
KBE2701525F
13mm Jacobs chuck, thumb switch for reverse, auxiliary handle, suitable for screwdriving, heavy duty planetary gearing, ¼â€ NPT air inlet thread for 10mm air hose, 90 PSI (6.3 bar) air pressure, 4CFM* (144 ltr/min) Air consumption, 3/8” -24 spindle thread. Overall length: 178mm.
Impact Drill 180 mm
close
Impact Drill 180 mm
KBE2701500E
13mm Jacobs chuck, high reduction gearbox, high torque, with side handle, ½ HP motor,1/4” NPT air inlet thread for 10mm air hose, 90PSI (6.3 bar ) air pressure, 4CFM* ( 144 ltr / min) air consumption, 3/8” – 24 spindle thread. Overall length: 180mm.
Impact Drill - 165 mm
close
Impact Drill - 165 mm
KBE2701375C
10mm Jacobs chuck, stall resistant, heavy duty bearing, ½â€ HP motor, ¼â€ NPT air inlet thread for 10mm air hose, 90PSI (6.3bar) air pressure, 4CFM* (144 ltr /min) air consumption, 3/8”-24 spindle thread. Overall length: 165mm.
Impact Drill 180 mm
close
Impact Drill 180 mm
KBE2701390D
Hammer finish casing, 10mm Jacobs chuck, stall Resistant, directional front exhaust, needle bearing gears, ¼â€ NPT air inlet thread for 10mm air hose, 90PSI ( 6.3 bar ) air pressure, 4 CFM* (144 ltr/min) air consumption,3/8”-24 spindle thread. Overall length: 180mm.
Impact Drill 165 mm
close
Impact Drill 165 mm
KBE2701400L
10mm Jacobs chuck, stall resistant, heavy duty bearings, thumb switch for reverse, suitable for screwdriving, 1/4” NPT air inlet thread for 10mm air hose, 90PSI (6.3 bar) air pressure, 4CFM* (144 ltr/min) air consumption, 3/8”- 24 spindle thread. Overall length: 165mm.


EXELLO INDIA All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.